how to change a car tyre

Screw the wheel nuts. Then using the wheel brace lightly tighten the wheel nuts.

How To Change Your Car Tyre The Easy Way Tire Change Spare Tire Flat Tire

Loosen the Wheel Nuts and Jack Up the Car When it comes to actually changing the tyre you should start by loosening the wheel nuts which enables you to easily remove the tyre and replace it with a newer alternative.

. Lift the spare wheel onto the hub making sure its fitted properly against the wheel nuts. Put each of the wheel nuts on by hand as far as they will go. Text displays Loosen the wheel nuts. Pump the jack to lift the car up Now pump up the jack and raise the car enough to easily pull out the tyre.

Just like when you loosened the nuts keep a straight arm and back and with the. Narrator Now youre ready to remove the deflated wheel. Step 4 - Take off the punctured wheel Once the cars jacked up you can undo the wheel nuts and take the wheel off. Carefully go ahead and remove the hubcap and then go on to loosen the lug nuts using the wrench first and then your hands.

Remove the hubcaps and locking nuts. Fully tighten the nuts clockwise with the spanner. As soon as you realize you have a flat tire do not abruptly brake or turn. Step-by-step instructions for changing a car tyre Make sure no one is inside the vehicle.

Check Things Youll Need To Change A Car Tyre Expert Tips FAQs. If your tread depth is the same in each groove of the tyre and between all tyres there is nothing to worry. Tighten the nuts or studs clockwise by hand and lower the jack slowly until the tyre rests on the ground do not lower the cars total weight onto the tyre. Undo the wheel nuts and set them aside on a clean surface.

And heres the step-by-step guide on changing the tyre. Place a rubber wheel chock in front and behind the wheel diagonal to the one youre changing. Block the wheels on the side not being lifted. Turn the handle slowly to lower the jack until the new wheel and tyre takes the weight of the car then slide the jack out from under the car.

Remove the hub cap or wheel cover if fitted. Ensure the ground is flat and free from gravel or mud. The screen then transitions to a shot of close up of the back right tyre of the car the driver has a wheel brace wrench in his hand and he proceeds to loosen each of the 5 nuts slightly by turning them with the wrench. Step 8 - Finishing Off Fully tighten the wheel nuts using the wheel brace.

Apply the handbrake and put the vehicle in park if automatic or in gear if manual. Using the jack lower your car until the tyre of the replaced wheel just touches the road. Lower the jack all the way and remove it. They may have a right or wrong way around so take note when removing them.

Lift the spare wheel onto the hub and line the bolts up with the rim holes. Using the wheel brace gently tighten the wheel nuts its safest to fully tighten them later when the car has been lowered back onto the ground. In this video जलद और सह तरक स Puncture Tyre कस बदल How to change Puncture Tyre by ourselveshow tochange apuncture tyre. Finish lowering your vehicle and then remove the jack.

Raise the car high enough to get the inflated tyre on as this will be bigger than the flat tyre. Remove the tyre Pull the tyre towards you so that it comes out. They advise motorists to pull off as far away as possible from passing traffic making sure that the ground on which the car is parked is firm and even. Obviously these nuts will then need to be refitted and secured safely but only once the process has been completely finished.

Lower the jack until the weight of the new tyre is on the ground. Level ground is good because it will prevent your vehicle from rolling. Find a safe spot Drive to the side of the road and find a spot to park the car. For example if the flat is front passenger side place the chocks around the rear driver-side wheel.

Repeat this process for all tyres and see how deep the coin goes in every tyre. One of our most experienced patrols show you how to simply and safely change a tyre if youre stuck with a puncture. Avoid slopes and soft ground and park as far away from traffic as possible. FIND A SAFE LOCATION.

An empty parking lot would be an ideal place. HOW TO CHANGE TIRES 1. Road safety experts warn that its not safe to change a punctured wheel when the stricken vehicle is stopped on a hard shoulder of a highway or simply at the side of a road. You can now remove the flat tyre from under the car.

Place it on the surface beside you. Remove the punctured wheel from underneath the car. Jun 19 2020 - All about step-by-step guide on how to change a car tyre. Now get your reflective triangle and put it about 20 metres behind the car.

Place the spare tyre into position. Switch on the parking or hazard light. Slowly reduce speed and scan your surroundings for a level straight stretch of road with a wide shoulder.